1800mAh Uvc Sterilizer Light

OEM SERVICE

1) Customized Logo;

2) Customized color

3) The production can be guaranteed;

4) Safty shipping service;

5) Technology supported;

6) High quality product;

7) Customized packaging;

8) Customized user manual;

9) Power adapter label etc

But all OEM is limited by quantity. Please contact the sell manager to get more details. Whatsapp: 86 18780041517   email: sales4@cdhkv.com

00mAhattery Car And Office Use UVC Sterilizer Light 6 Pcs LED Chips

FAQ

Q: Are you a factory?
A: Yes. We are a factory with more than 100 employees and you can visit our factory. Welcome the OEM order.
Q: If we order the samples today, when it will be dlivery and arrive ?
A: We need to check the storage firstly. In the special period, it is wery hard to tell you the definite arriving time in advance. In general same day we will ship it out and you can see it online the second day, and will cost about 3-4 days arrive. Please make sure again before you place an order.
Q: Where is your factory located? How can I visit there?
A: Our factory is located in Shenzhen China. You can contact the seller bofore you visit our factory and we will arrange a car to pick you up.
Q: How does your factory do regarding quality control?
A: Quality is priority. QC department with professional quality assurance specialist attach great importance to quality
controlling from the very beginning to the very end. Our factory has gained Rohs, hd-mi, SGS, CE FECC,ISO9001:2008 authentication.
Etc.
Q: Please let us know if your product does not arrive in your delivery time frame?
A: This situation never happened in our company till now, because we have professional managerial personnel to overview and
control for every parts of production, and we usually have training to every staff.

Note: When using ultraviolet disinfection lamps, the environment should be kept clean, and there should be no dust or water mist in the air. When the indoor temperature is below 20 degrees Celsius or the relative humidity exceeds 50%, the exposure time should be extended.

    After scrubbing the ground, the ultraviolet light should be disinfected after the ground is dry; when disinfecting the indoor air with the ultraviolet light, the room should be kept clean and dry to reduce dust and water mist, the temperature is lower than 20 degrees Celsius or higher than 40 degrees Celsius, and the relative humidity is greater than 60% When irradiating the surface of articles with ultraviolet rays, the irradiation surface should be directly irradiated with ultraviolet rays, and a sufficient irradiation dose should be reached; the ultraviolet light source should not be exposed to people to avoid damage. When the ultraviolet lamp is working, it needs to leave people, livestock, etc., and some items that are not suitable for ultraviolet irradiation need to be effectively covered. For ultraviolet lamp disinfection, it is necessary to select the appropriate ultraviolet lamp power in combination with the indoor space, and then coordinate with the corresponding time (about half an hour). The irradiation intensity of the ultraviolet lamp gradually decreases during the use of the ultraviolet lamp, so the intensity of disinfecting ultraviolet rays should be measured frequently.

   Once it falls below the required intensity, it should be replaced in time. The service life of the ultraviolet disinfection lamp, that is, the time from the intensity of the new lamp to 70μW / cm 2 (power ≥30W), or the time to 70% of the original new lamp (power <30W), should not be low At 1000h. Ultraviolet disinfection lamps are lamps that use ultraviolet light to kill pathogenic microorganisms. All surfaces, water and air contaminated with pathogenic microorganisms can be disinfected with ultraviolet light. The ultraviolet disinfection lamp used in China has high radiation intensity and disinfection and sterilization effect at a longer distance. When used, it must be used in an unmanned state to avoid prolonged exposure to human eyes and skin.